Helen

IN STOCK 

Introducing Helen. Helen is an 8mm bladed cuticle nipper.

Helen is the size of a standard sized nipper. Handcrafted to British Standards, Helen also has our unique titanium coating which ensures optimum hygiene.

With the perfect precision and grip for intricate cuticle removal, nail services and maintenance.

Our Helen fine cuticle nips are a staple tool for any Professional Nail Technician and the hygiene conscious consumer.  

AS SEEN ON YOUTUBE 

Top tips

Helen nippers are a standard size nippers, with fine blades designed specifically to nip off the fine edges of dead skin from fingers and toes. It is important you never cut the live skin surrounding the nail bed. Besides causing damage to the living tissue over nipping can also damage the protective "seal" between the nail and the finger inviting dirt and infection.

To remove excess non living tissue, position the nippers just above the area where the hangnail is attached to the skin and very carefully nip once. Never pull on the skin if it doesn't come off right away. If you are using them correctly it should never hurt or draw blood. Before using Helen on a client always practice on yourself first. She is very sharp, always replace protective cap.

Please note you will be charged when your order is placed. 

Registered Design. IPO.Gov.Uk - except no imitations

Katey

PRE ORDER DELIVERY - 15 WEEKS  

Introducing Katey, a 4mm bladed cuticle nipper with a clasp, Katey is perfect for the perfectionist nail professional.  Handcrafted to British Standards , Katey also has our unique titanium coating which ensures optimum hygiene.

With the perfect precision and grip for intricate cuticle removal, nail services and maintenance, our Katey super fine cuticle nips are a staple tool for any Professional Nail Technician and hygiene conscious consumer.  

AS SEEN ON YOUTUBE 

Top tips

Katey nippers are the smallest of our nippers, with the smallest and finest blades designed specifically to nip off the finest pieces of dead skin. It is important you never cut the living skin surrounding the nail bed, besides causing damage to the living tissue over nipping can also damage the protective "seal" between the nail and the finger inviting dirt and infection.

To remove the non living tissue, position the nippers just above the area where the hangnail attaches to the skin and very carefully nip once. Never pull on the skin if it doesn't come off right away. If you are using them correctly it should never hurt or bleed. Before using Katey on a client always practice on yourself first. She is very sharp, always replace protective cap.

Please note you will be charged when your order is placed.

WE RECOMMEND HAVING YOUR TOOLS SERVICED YEARLY - YOU CAN BOOK YOUR SERVICE HERE.  

Registered Design. IPO.Gov.Uk - except no limitations 

PRE ORDER 4-5 WEEKS

Ethel

Introducing Ethel, our straight bladed manicure multi tool, she is double ended and has a flat blade. Ethel is handcrafted to British Standards and has our unique titanium coating which ensures optimum hygiene.

Our Ethel manicure tool has been specifically designed as a tool suitable for nail preparation pre manicure or pedicure.

Ethel is the ultimate tool for all Nail Professionals, she has a straight blade for the removal of dead skin from the nail plate, leaving a clear, perfectly prepped nail plate giving the best retention for products.

PROFESSIONAL USE ONLY

Top tips 

Ethel is not a pusher and should not be used in the same way, she is incredibly sharp and must be used with caution. Holding your Ethel tool the same way you would hold a pencil; keep your grip light but firm. Place the edge of the tool flat against the nail plate and gently, with no pressure, glide the tool over the plate lifting off the dead skin residue. If this causes any pain or discomfort you are applying too much pressure.

Not all nails are the same and some will not create dead skin residue this does not mean apply pressure. 

Always ensure the bladed edges are perfect and without any imperfections. If the blades are damaged do not use.

AS SEEN ON YOUTUBE  - OUR FASTEST SELLING TOOL  

Registered Design. IPO.Gov.Uk - Accept no imitations 

Martha   

Introducing Martha our small nail paddle tool. Martha is used to remove and clean crevices around and under the nail. Martha has been handcrafted to British Standards and also has our unique titanium coating which ensures optimum hygiene.

With the perfect precision and grip for nail prep and maintenance our Martha nail paddle is a staple tool for any professional nail technician, manicurist and pedicurist and the hygiene conscious consumer.

 IN DEMAND - AS SEEN ON YOUTUBE TUTORIALS 

Top tips

Martha is a paddle designed to clean under and around the nail, she has a small spoon like paddle which scoops up dead skin. Holding your Martha tool the same way you would hold a pencil; keep your grip light but firm. Place the edge of the paddle against the nail plate and gently with no pressure, scoop around the nail plate and wall scooping up the dead skin residue. 

If using Martha causes any pain or discomfort you are applying too much pressure.

Not all nails are the same some will not gather any dead skin residue. By carrying out this step correctly will ensure better retention. This can be done before every manicure or pedicure.  Always ensure the tool is perfect and without any imperfections. If the paddle is damaged do not use.

Edith

PRE ORDER - 5 WEEKS 

Introducing Edith our NEW Pedicure Knife, Edith has a perfectly contoured edge to sit flush against the skin. Edith is handcrafted to British Standards and has our unique titanium coating which ensures optimum hygiene.

Our Edith has been specifically designed as a tool suitable for product removal during pedicure treatments. 

Edith, is the ultimate tool for Beauty Professionals, her perfectly angled blade is perfect for the removal of product without scratching the skin, leaving perfectly clear skin.

Edith is similar to a traditional foot blade but should not be used in the same way, her is blade is more rounded off therefore and not suitable for cutting away dead skin. 

PROFESSIONAL USE ONLY - USE CAUTION SHARP EDGES. 

Top tips

Edith is similar to a traditional pedicure knife however she should not be used in the same way, she is designed to simply remove dead skin during a pedicure treatment. Holding your Edith tool the same way you would hold a knife; keep your grip light but firm, 

Always ensure you practice before using on a client so you’re familiar with the tool.

Place the edge of the tool flat against the skin and gently with almost no pressure, glide the tool over the product lifting off the product residue.  If this causes any pain or discomfort you are applying too much pressure. Not all products are the same, some will be removed with ease and others won't. 

Always ensure the edges are perfect and without any imperfections.

Registered Design. IPO.Gov.UK

Beatrice

PRE ORDER 8-10 WEEKS

Introducing Beatrice our double ended multi tool, Beatrice is double ended and has a perfectly contoured edge to sit flush against the nail plate. Beatrice is handcrafted to British Standards and has our unique titanium coating which ensures optimum hygiene.

Our Beatrice has been specifically designed as a tool suitable for both gel and acrylic product removal, pre manicure or pedicure.

Beatrice, our double ended multi tool is the ultimate tool for Beauty Professionals, her perfectly angled edges are perfect for the removal of product without scratching or damaging the nail plate, leaving a perfectly cleared nail plate. Beatrice is similar to a traditional tool but should not be used in the same way, she is blunt and not suitable for nail prep.

AS SEEN ON YOU TUBE - PROFESSIONAL USE ONLY

Top tips

Beatrice is similar to a traditional pusher however she should not be used in the same way, she is blunt and will not remove dead skin from the nail plate she is designed just to remove product. Holding your Beatrice tool the same way you would hold a pencil; keep your grip light but firm, 

always ensure you practice before using on a client so you’re familiar with the tool.

Place the edge of the tool flat against the product and gently with almost no pressure, glide the tool over the product lifting off the dissolved residue.  If this causes any pain or discomfort you are applying too much pressure. Not all products are the same, some will be removed with ease and others won't. By carrying out this step correctly, it will ensure the product is removed without blunting your tooling. 

Always ensure the edges are perfect and without any imperfections.

Registered Design. IPO.Gov.UK